Huawei 5288 V3 V100R003 User Manual page 207

5288 V3 Server
User Guide
mainboard is replaced. For details, see Import/Export in the
User
Step 4 Wear an ESD wrist strap. For details, see
Step 5 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 6 Power off the 5288 V3. For details, see
Step 7 Remove all external cables such as power and network cables.
Step 8 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 9 Remove the chassis cover. For details, see
Step 10 Remove the supercapacitor if it is installed. For details, see
Supercapacitor (RAID Controller
Step 11 Remove the riser cards. For details, see
Step 12 Remove the air duct. For details, see
Step 13 Remove all fan modules. For details, see
Step 14 Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in
7-82.
Issue 26 (2018-11-19)
Guide.
NOTE
l iBMC 2.32 and later versions support the import and export of configuration files.
l The original iBMC and BIOS configuration files exported from the iBMC can be directly imported
after the mainboard replacement. However, the exported configuration files do not contain password
information. You need to manually configure the password for the iBMC user. For details, see
Import/Export in the
l If the iBMC of the mainboard to be replaced cannot be logged in or the iBMC and BIOS
configuration files are not exported before the mainboard is replaced, you need to manually
configure the iBMC and BIOS after replacing the mainboard.
l The iBMC and BIOS configuration files exported from the iBMC contain configuration items. For
details, see "Configuration File Description" in the
Copyright © Huawei Technologies Co., Ltd.
Huawei Rack Server iBMC User
1 Safety
4.2 Powering Off the
7.11 Removing the Chassis
Card).
7.19 Removing the Riser
7.13 Removing the Air
7.15 Removing a Fan
Huawei Rack Server iBMC
Guide.
Huawei Rack Server iBMC User
Instructions.
Server.
3.6 Removing the
Cover.
7.33 Removing the
Card.
Duct.
Module.
7 Replacing Parts
Guide.
Figure
197