Huawei 5288 V3 V100R003 User Manual page 199

5288 V3 Server
User Guide
Step 5 Before installing a CPU or heat sink, use tissue to clean up the oil, remaining thermal
compound, or foreign objects on their surfaces.
Step 6 Determine the area on the CPU for contacting the heat sink, and paste 0.4 ml of thermal
compound on the area.
You can paste thermal compound using any of the six methods shown in
line, five-point, and S-shape, and cross pasting methods are recommended.
Figure 7-73 Pasting methods
Step 7 Use a clean card to smear the thermal compound over the entire center of the CPU.
The thermal compound layer is as thick as a common piece of paper.
smeared thermal grease layer. Ensure that the thermal compound is evenly and fully painted.
Issue 26 (2018-11-19)
NOTE
The thermal compound injector has volume marks.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure 7-73 Dual-
Figure 7-74 shows the
189