Huawei 5288 V3 V100R003 User Manual page 186

5288 V3 Server
User Guide
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the riser card tray above the RAID controller card. For details, see
the Riser
Step 8 Locate the supercapacitor, which is in one of the four positions shown in
Figure 7-61 Supercapacitor positions
Step 9 Loosen the screws on the trans flash module (TFM). See step (1) in
Issue 26 (2018-11-19)
Card.
Copyright © Huawei Technologies Co., Ltd.
4.2 Powering Off the Server.
7.11 Removing the Chassis
7 Replacing Parts
3.6 Removing the
Cover.
7.19 Removing
Figure 7-61.
Figure 7-62.
176