Technical Specifications - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Item
PSU
System
management
Security
GPU

2.12 Technical Specifications

Table 2-13
Issue 26 (2018-11-19)
Specifications
Two hot-swappable PSUs are in redundancy mode:
l 750 W AC Platinum PSU, supporting 240 V HVDC
l 750 W AC Titanium PSU
l 1200 W AC Platinum PSU
l 1200 W PSU, supporting 380 V HVDC
l 800 W PSU, supporting –48 V DC or –60 V DC
NOTE
The PSUs on one server must have the same BOM number. For details about
BOM numbers, see
l UEFI
l Huawei iBMC
– Uses an independent port.
– Supports Simple Network Management Protocol (SNMP) and
Intelligent Platform Management Interface (IPMI).
– Provides the GUI, virtual KVM, virtual media, Serial Over LAN
(SOL), intelligent power supply, remote control, and hardware
monitoring features.
l NC-SI
l Supports Huawei eSight management software and integration with
third-party management systems, such as VMware vCenter,
Microsoft SystemCenter, and Nagios.
l Power-on password
l Administrator password
l Chassis cover opening logging
l Front bezel (optional)
The front bezel is installed on the front panel and comes with a
security lock to prevent unauthorized operations on hard disks.
Integrates the SM750 display chip and provides 32 MB display memory.
The maximum resolution is 1920 pixels x 1200 pixels at 60 Hz with 16
M colors.
NOTE
l After a dedicated graphics card driver is installed, only Windows Server 2012,
Windows Server 2012 R2, Windows Server 2016 can support the resolution of
1920 pixels x 1200 pixels while other OSs only support the maximum
resolution supported by the built-in drivers.
l If the resolution is greater than 1024 x 768, the display effect may be affected.
describes the technical specifications for the 5288 V3.
Copyright © Huawei Technologies Co., Ltd.
Huawei Server Compatibility
2 Product Overview
Checker.
48