Removing A Pcie Card; Removing A Pcie Card From A Riser Card - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 8 Install the chassis cover. For details, see
Step 9 Install the 5288 V3. For details, see
Step 10 Connect all internal cables such as power and network cables. For details, see
External
Step 11 Power on the 5288 V3. For details, see
----End

7.21 Removing a PCIe Card

A PCIe card can be installed on the mainboard or on a riser card. The following describes
how to remove a PCIe card from the mainboard or from a riser card.

7.21.1 Removing a PCIe Card from a Riser Card

Remove a PCIe card before replacing it with a new one or removing the riser card where it is
installed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove all cables from the riser card if any.
Step 8 Remove a riser card tray. Lift the riser card tray. See
Issue 26 (2018-11-19)
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
Figure
7 Replacing Parts
Cover.
3.5 Connecting
Server.
Server.
3.6 Removing the
Cover.
7-44.
158