Huawei 5288 V3 V100R003 User Manual page 227

5288 V3 Server
User Guide
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the position of the SD card to be replaced. See
the SD card mezzanine card, and SD card 2 is below the SD card mezzanine card.
Figure 7-101 SD card position
Step 3 Remove the SD card to be replaced. For details, see
Step 4 Take the spare SD card out of its ESD bag.
Step 5 If the SD2 card needs to be installed, you need to remove the SD card first. For operation
details, see
Step 6 Insert the SD card into the mezzanine card. See
Issue 26 (2018-11-19)
NOTE
The spare microSD card cannot contain any data.
l If the server has only one microSD card, and the OS is installed on the card, migrate the important
data on the SD card to another storage device before the replacement.
l If the server has two microSD cards, install the new microSD card in the same slot as the replaced
one.
7.47 Removing an SD
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
7.47 Removing an SD
Card.
Figure 7-102.
7 Replacing Parts
Figure 7-101.SD card 1 is above
Card.
217