Huawei 5288 V3 V100R003 User Manual page 84

5288 V3 Server
User Guide
2.
3.
Step 5 When you use an SFP+ cable:
1.
2.
Issue 26 (2018-11-19)
Close the latch on the optical module to secure it. See step (2) in
Insert the optical cable into the optical module. See step (3) in
Remove the old SFP+ cable.
Gently push the power connector inwards and pull the latch out to remove the SFP+
cable. See Figure 3-24.
Do not directly pull the latch out.
Figure 3-24 Removing an SFP+ cable
Connect the new SFP+ cable.
Remove the dust-proof cap on the port, and insert the cable connector into the port. See
Figure 3-25.
NOTE
When you hear a "click" and the cable cannot be pulled out, the connector is secured.
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the 5288 V3
Figure 3-23.
Figure 3-23.
74