Show Isis Database - Dell C9000 Series Reference Manual

Example (Router-
The bold section identifies that Multi-Topology IS-IS is enabled in Transition mode.
Isis)
Dell(conf-router_isis)# show config
!
router isis
clns host ISIS 49.0000.0001.F100.E120.0013.00
log-adjacency-changes
net 49.0000.0001.F100.E120.0013.00
!
address-family ipv6 unicast
maximum-paths 16
multi-topology transition
set-overload-bit
spf-interval level-1 100 15 20
spf-interval level-2 120 20 25
exit-address-family
Example (Address-
The bold section identifies that Multi-Topology IS-IS is enabled in Transition mode.
Family_IPv6)
Dell(conf-router_isis-af_ipv6)# show conf
!
address-family ipv6 unicast
maximum-paths 16
multi-topology transition
set-overload-bit
spf-interval level-1 100 15 20
spf-interval level-2 120 20 25
exit-address-family

show isis database

Display the IS-IS link state database.
C9000 Series
Syntax
show isis database [level-1 | level-2] [local] [detail | summary]
[system-id][lspid][vrf vrf-name]
Parameters
level-1
level-2
local
detail
summary
system-id
(OPTIONAL) Displays the Level 1 IS-IS link-state database.
(OPTIONAL) Displays the Level 2 IS-IS link-state database.
(OPTIONAL) Displays local link-state database information.
(OPTIONAL) Detailed link-state database information of each
LSP displays when specified. If not specified, a summary displays.
(OPTIONAL) Summary of link-state database information
displays when specified.
(OPTIONAL) Display link-state database for system-id.
Intermediate System to Intermediate System (IS-IS) 1107