Show Config - Dell C9000 Series Reference Manual

Related
msti
Commands
name

show config

View the current configuration for the mode. Only non-default values are shown.
C9000 Series
Syntax
show config
Command Modes MULTIPLE SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
Dell(conf-mstp)#
— maps the VLAN(s) to an MST instance.
— assigns the region name to the MST region.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
Multiple Spanning Tree Protocol (MSTP) 1431