Reachable-Time - Dell C9000 Series Reference Manual

reachable-time

Enable the verification of the configured reachability time in the received RA packets.
C9000 Series
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue
command.
Parameters
value
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the advertised reachability time in milliseconds. The range
is from 0 to 3,600,000 milliseconds.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1450