Area Stub - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Usage Information Only the routes within an area are summarized, and that summary is advertised to other

areas by the ABR. External routes are not summarized.

area stub

Configure a stub area, which is an area not connected to other areas.

C9000 Series

area area-id stub [no-summary]

To delete a stub area, use the no area area-id stub command.

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Added support for the Multi-Process OSPF.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— creates a stub area.

— enters ROUTER OSPF mode to configure an OSPF instance.

Specify the OSPF area in dotted decimal format (A.B.C.D.) or

enter a number from zero (0) to 65535.

(OPTIONAL) Enter the keywords no-summary to prevent the

ABR from sending summary Link State Advertisements (LSAs)

into the stub area.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Open Shortest Path First (OSPFv2 and OSPFv3)

Table of Contents