Ip Multicast-Limit - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

static ip-address

Not configured.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

E-Series legacy

show ip mroute

ip multicast-limit

To limit the number of multicast entries on the system, use this feature.

C9000 Series

ip multicast-limit limit

Enter the OSPF process identification number then the IP

address in dotted decimal format of the RPF neighbor. the

range is from 1 to 65535.

Enter the IS-IS alphanumeric tag string then the IP address

in dotted decimal format of the RPF neighbor.

Enter the RIP IP address in dotted decimal format of the

RPF neighbor.

(OPTIONAL) Enter the Static IP address in dotted decimal format

of the RPF neighbor.

(OPTIONAL) Enter the IP address in dotted decimal format of the

RPF neighbor.

(OPTIONAL) Enter a number as the distance metric assigned to

the mroute. The range is from 0 to 255.

Introduced on the C9010.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

— displays the routing table.

Table of Contents