Ip Msdp Shutdown - Dell C9000 Series Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
7.5.1.0
Usage Information The system counts the SA messages originated by itself and those messages received
from the MSDP peers. When the total SA messages reach this limit, the subsequent SA
messages are dropped (even if they pass RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this command
is applied, those SA messages that are already in the system continue to be accepted.
To enforce the limit in such situation, use the clear ip msdp sa-cache command.
Related
ip msdp peer
Commands
clear ip msdp peer
show ip msdp

ip msdp shutdown

Administratively shut down a configured MSDP peer.
C9000 Series
Syntax
ip msdp shutdown {peer address}
Parameters
peer address
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
— configures the MSDP peer.
— clears the MSDP peer.
— displays the MSDP information
Enter the peer address in a dotted decimal format (A.B.C.D.).
Description
Introduced on the C9010.
Introduced on the Z9500.
Multicast Source Discovery Protocol (MSDP) 1415