Spanning-Tree Msti - Dell C9000 Series Reference Manual

To disable the multiple spanning tree protocol on the interface, use the no spanning-
tree command.
Parameters
spanning-tree
Defaults Enable.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.0

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.
C9000 Series
Syntax
spanning-tree msti instance {cost cost | priority priority}
Parameters
msti instance
cost cost
Enter the keywords spanning-tree to enable the MSTP on the
interface.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword msti and the MST instance number. The
range is from zero (0) to 63.
(OPTIONAL) Enter the keyword cost then the port cost value.
The range is from 1 to 200000. The defaults are:
• 10-Gigabit Ethernet interface = 2000
Multiple Spanning Tree Protocol (MSTP) 1436