Show Fefd - Dell C9000 Series Reference Manual

show fefd

View FEFD status globally or on a specific interface.
C9000 Series
Syntax
show fefd [interface]
Parameters
interface
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.12.0
Usage Information The following describes the show fefd command shown in the following example.
Field
Interface
Mode
Interval
State
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
•
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Description
Displays the interfaces type and number.
Displays the mode (aggressive or normal) or NA if the interface
contains fefd reset in its configuration.
Displays the interval between FEFD packets.
Displays the state of the interface and can be one of the
following:
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
Layer 2 1347