Dell C9000 Series Reference Manual page 652

Parameters
acl
router
switch
Command Modes
•
•
Command History
Version
9.9(0.0)
9.5.(0.0)
9.3.(0.0)
Usage Information The following regions must be provided in the show cam-usage output:
•
•
•
The following table describes the output fields of the show cam-usage command.
Table 2. show cam-usage Command Description.
Field
LineCard
Portpipe
CAM-Region
Total CAM space
Used CAM
Available CAM
(OPTIONAL) Enter the keyword acl to display Layer 2 and Layer
3 ACL CAM usage.
(OPTIONAL) Enter the keyword router to display Layer 3 CAM
usage.
(OPTIONAL) Enter the keyword switch to display Layer 2 CAM
usage.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810, S4820T, Z9000 and MXL.
L3AclCam
L2AclCam
V6AclCam
Description
Number of the line card that contains
information on ACL VLAN groups
The hardware path that packets follow
through a system for ACL optimization
Type of area in the CAM block that is
used for ACL VLAN groups
Total amount of space in the CAM block
Amount of CAM space that is currently in
use
Amount of CAM space that is free and
remaining to be allocated for ACLs
Content Addressable Memory (CAM) 652