Dell C9000 Series Reference Manual page 771

•
•
forwarding-table Enter the keyword forwarding—table mode to display the
mode statistics related to forwarding table.
linecard slot-id Enter the linecard slot-id parameters with a command
option to display hardware statistics from the specified line-card
ports. The range of line-card slot IDs is from 0 to 2. The
command options are:
•
•
•
•
•
•
•
•
•
•
use the detail option to display the port-statistics in
details.
register: Displays internal control-plane registers.
table-dump: Displays the tables from the bShell.
buffer total-buffer: Displays the total number of
buffers allocated for a specified line card.
buffer unit unit-num port statistics: Displays
the number of buffers allocated for a specified NPU. The
range of port-pipe unit numbers is 0–3.
buffer unit unit-num total-buffer : Displays the
number of buffers allocated for a specified NPU. The range
of NPU numbers is 0–3.
cpu data-plane statistics: Displays data-plane
statistics, including the HiGig port statistics with input/
output counters to which the stacking module is
connected.
cpu i2c statistics: Displays active i2c-address
statistics.
cpu management statistics: Displays management
port counters for a specified line card.
cpu sata-interface statistics: Displays sata-
interface error counter-statistics.
drops unit unit-num {port {port-num | range}:
Displays the number of dropped packets on the ports of a
specified line-card.
user-port {user-port-num | port-range}:
Displays statistics on a specified line-card port or range of
ports.
unit unit-num {counters | details | ipmc-
replication | port-stats | register | table-
dump}: Displays statistics on a specified NPU. The
command options are:
• counters: Displays the traffic counters.
• details: Displays more detailed hardware
information.
• ipmc-replication: Displays the multicast IPMC
replication table from the bShell.
• port-stats: Displays the internal statistics on a per-
port basis.
• register: Displays the line-card internal registers.
• table-dump: Displays the tables from the bShell.
Debugging and Diagnostics 771