Ipv6 Router Isis - Dell C9000 Series Reference Manual

Related
Commands

ipv6 router isis

Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
C9000 Series
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
Usage Information Configure a network entity title (the net command) to specify the area address and the
router system ID.
• net — configures an IS-IS network entity title (NET) for the routing process.
• router isis — enables the IS-IS routing protocol.
(OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not specified.
The tag name must be unique for all IP router processes for a
given router.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Intermediate System to Intermediate System (IS-IS) 1074