show cam-acl-egress-pe
Display details of the global egress CAM ACL profiles for the port extender.
C9000 Series
Syntax
show cam-acl-egress-pe
Defaults
None
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information The display reflects the settings implemented with the cam-acl-egress-pe
command.
This command only displays the details of CAM ACL egress profiles configured globally
on the PE. It does not display CAM ACL egress profiles for each PE.
Example
Dell# show cam-acl-egress-pe
-- Port extender Egress Cam ACL --
L2Acl
Ipv4Acl
Ipv6Acl
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Current Settings(in block sizes)
1 block = 256 entries
:
:
:
1
1
2
Content Addressable Memory (CAM)
656