full
TCP statistics:
ARP statistics:
Related
clear ip traffic
Commands
show tcp statistics
Display statistical information about TCP traffic transmitted on Z9500 CPUs.
C9000 Series
Syntax
show tcp statistics {all | cp | rp}
Parameters
all
cp
rp
Command Modes
EXEC Privilege
Default
Display TCP information from all processors.
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
Sent: 0 total, 0 forwarded broadcasts
Rcvd: 23829 total, 0 checksum errors, 0 no port
Sent: 16048 total
Rcvd: 156 requests, 11 replies
Sent: 21 requests, 10 replies (0 proxy)
— clears IP traffic statistics.
Enter the keyword all to view all TCP statistics on the switch
CPUs.
Enter the keyword cp to view TCP statistics only from the
Control Processor.
Enter the keyword rp1 to view TCP statistics only from the
Route Processor.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
IPv4 Routing
1235