ABB i-bus KNX Product Manual page 96


ABB i-bus KNX
Commissioning
Status response of function staircase
Options:

no: The status of the function Staircase lighting is not transferred to the KNX.

yes: via object "Stairc. light. activate/status": Using the communication object Stairc. light.
activate/status does not just activate or deactivate the function Staircase lighting. This communication
object also uses the status to display whether the function Staircase lighting is active or inactive. The
following parameter appears:
94 2CDC507128D0202 | DLR/A 4.8.1.1
no
yes: via object "Stairc. light. activate/status"
send,
additional object, see note above
Options: after a change
after request
after a change or request

after a change: The status is sent via the communication object after a change.

after request: The status is sent after a request by the communication object Request status
values.

after a change or request: The status is sent via the KNX when the status changes or the
status is requested via the communication object Request status values.