ABB i-bus KNX Product Manual page 114


ABB i-bus KNX
Commissioning
Status response of function slave
Options:
This parameter defines whether the status of the function Slave of the lighting group is sent on the KNX.
For this purpose, the communication object Activate Slave/status is enabled.

no: The state of the function Slave is not actively sent on the KNX.

yes: via object "Activate Slave/status": The common communication object Activate Slave/status
receives a telegram with the value 1 to Activate function slave and simultaneously sends the current
active status of the function Slave on the KNX. It is possible to parameterize when the status is sent
on the KNX. The following parameter appears:
112 2CDC507128D0202 | DLR/A 4.8.1.1
no
yes: via object "Activate Slave/status"
Send
Options: after a change
after request
after a change or request

after a change: The status is sent via the communication object after a change.

after request: The status is sent after a request by the communication object Request status
values.

after a change or request: The status is sent via the KNX when the status changes or the
status is requested via the communication object Request status values.