Parameters - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2

Parameters

This chapter describes the parameters of the DALI Light Controller DLR/A 4.8.1.1 using the parameter
window. The parameter window features a dynamic structure so that further parameters or whole
parameter windows may be enabled, depending on the parameterization and the function of the lighting
groups.
In the following description, the lighting group X or Gx (abbreviated form) represents one of the 8 lighting
groups of a DLR/A.
Note
The additional function Light control is only available for lighting groups 1...4. With the description of the
DLR/A with its properties and parameters, the explanations and the notation Lighting group x always
only refer to one of the first 4 lighting groups of the DLR/A.
The default values of the parameters are underlined, e.g.:
Option:
Indented parameter descriptions indicate that this parameter is only visible when the main parameter is
parameterized accordingly.
The illustrations of the parameter windows in this manual correspond to the ETS3 parameter windows.
The application is optimized for ETS3. Editing parameters with ETS2 is not possible. If the ETS version is
higher than ETS3, the representation may deviate slightly.
Note
If in the following the communication objects Switch or Brightness value are mentioned, they also apply
for the communication objects Switch/status or Brightness value/status.
yes
no
DLR/A 4.8.1.1 | 2CDC507128D0202 39