ABB i-bus KNX Product Manual page 74


ABB i-bus KNX
Commissioning
72 2CDC507128D0202 | DLR/A 4.8.1.1
Status of burn-in
Options: no
yes: via object "Burn-in lamp/status"
The DLR/A features the option of sending the status of the function Burn-in on the KNX via
communication object Burn-in lamp/status.

no: No status message is sent for the function lamp burn-in.

yes: The communication object Burn-in lamp changes to Burn-in lamp/status. If this
communication object receives an ON telegram, the function Burn-in is started and the status
is sent on the KNX. The following parameter appears:
Send
Options: after a change
after request
after a change or request

after a change: The status is sent via the communication object after a change.

after request: The status is sent after a request by the communication object Request
status values.

after a change or request: The status is sent via the KNX when the status changes or
the status is requested via the communication object Request status values.