Communication Objects - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.3

Communication objects

In this chapter, the communication objects of the DALI Light Controller DLR/A 4.8.1.1 are described. The
description is divided into blocks, which relate to the name of the communication object.




In order to obtain a quick overview of the function possibilities of the DLR/A, all communication objects are
listed in an overview table. The detailed function can be examined in more detail in the subsequent
description of the individual communication objects.
Note
Some communication objects are dynamic and are only visible if the corresponding parameters are
activated in the application. In the following description, Group x represents a lighting group 1...8 and
Scene x represents any scene 1...14.
Note
If a DALI device is assigned to several DALI groups, this is referred to as overlapping groups. This
function is not supported.
General - Communication objects, valid for the entire DALI Light Controller
DALI output - Communication objects which relate to the entire DALI output
Group x - Communication objects for a lighting group x
Scene x - Communication objects for the function Scene
DLR/A 4.8.1.1 | 2CDC507128D0202 117