Functional Overview - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.1.2.2

Functional overview

Top left you can see the Source channel selection window for marking the source channels. Next to this is
the Destination channels selection window for marking the destination channel/channels.
Source channel
With the selection of the source channel, you define which parameter settings should be copied or
exchanged. Only one source channel can be selected at a time.
Destination channels
With the selection of the destination channel/channels, you define which channel/channels are to assume
the parameter settings of the source channel.

For the function Exchange, only one target DALI output can be selected at a time.

For the function Copy, different destination channels can be selected simultaneously. For this
purpose, press the Ctrl key and mark the required channels with the mouse cursor, e.g. channel G1
Group and G5 Group.
With this button, you select all available destination channels, e.g. A...H.
Reset the selection of the destination channel with this button.
DLR/A 4.8.1.1 | 2CDC507128D0202 37