Conversion Procedure - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.1.1.1

Conversion procedure


Import the current application into ETS.

Insert the desired device into your project.

Right click on the product and select Plug-in > Convert in the context menu.

Then make the desired settings in the dialog Convert.

Finally, you must exchange the physical address and delete the old device.
Should you wish to only copy individual channels within a device, use the function
Copying and exchanging parameter
34 2CDC507128D0202 | DLR/A 4.8.1.1
settings, page 35.