Parameter Window Scene X - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.4.1

Parameter window Scene x

In parameter window Scene x (x = 1, 2...14), the general settings for the light scenes are undertaken. The
parameter window Scene x is enabled if in parameter window
required scene is enabled.
A scene value must be assigned in order to set a scene value for the lighting group. The scene value
complies with the brightness value, which the lighting group assumes when the scene is recalled.
Note
When the function Staircase lighting is enabled or an additional function (Light control or Slave) is
enabled, the reaction to a scene recall can be parameterized in parameter window- Gx Control
Operating, Gx Slave or Gx Staircase lighting.
114 2CDC507128D0202 | DLR/A 4.8.1.1
Parameter window Scenes, page 113, the