Communication Objects - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.3

Communication objects

This chapter describes the communication objects of the DALI Light Controller DLR/S 8.16.1M. The
description is divided into blocks which relate to the name of the communication object.

General

DALI output

Group x

Scene x
In order to obtain a quick overview of the function possibilities of the DLR/S, all the communication objects
are listed in an overview table. The detailed function can be examined in more detail in the subsequent
description of the individual communication objects.
Note
Some communication objects are dynamic and are only visible if the corresponding parameters are
activated in the application. In the following description, Group x represents a lighting group 1...16 and
Scene x represents any scene 1...14.
Note
Overlapping lighting groups (one device is assigned to several lighting groups) are not prohibited by the
DLR/S. However, they cannot be supported by parameters in the DLR/S.
Overlapping lighting groups should not be used due to the complexity of a light controller.
- Communication objects, valid for the entire DALI Light Controller
- Communication objects which relate to the entire DALI output
- Communication objects for a lighting group x
- Communication objects for the Scene x function
DLR/S 8.16.1M | 2CDC 507 100 D0202 121