Logon To The Equipment; Communication Via Intranet/Internet; Communication Media; Communication Settings - ABB ETL600 Instruction Manual

Digital power line carrier system
Table of Contents

Advertisement

ABB Switzerland Ltd
4.4.3.3.

Logon to the equipment

Point to Equipment / Connect to open the Connect dialog box.
Select Logon, accepting the default value of 0 for the Equipment ID.
Select Local. If parameters have to be downloaded to the equipment,
click on Read & write access. If a password has been downloaded
into the equipment previously and if Read/write access is desired,
enter the correct Write password. If immediately after logon,
configuration and/or status data are to be uploaded, check the boxes
Upload configuration and/or Upload status.
Click the Dial button. Choose Add item and enter Station Name,
Phone Number and – if required – Country Code and Area Code for
the remote modem. After clicking Connect, the modem perfoms the
necessary actions to establish a dialling connection. As soon as the
connection is made, the colour of the circle-button in the toolbar turns
to green.
4.4.4.

Communication via intranet/internet

HMI600 can communicate with ETL600 via internet/intranet.
Main control center
HMI600
Ethernet
connection
Fig. 4-3
4.4.4.1.

Communication media

The PC with the HMI600 acts as client and must have and
internet/intranet access via network card.
A second PC acting as server and satisfying the requirements given in
section 4.2.1, with the server program SVR600 installed. The PC
should have a free COM port and internet/intranet access.
For the connection between server PC and modem, a 9 pole 1:1
modem cable (female to male) is required. In case the COM port of the
PC has a 25 pole RS-232 connector, an adapter (25 pole female to 9
pole male) is needed.
4.4.4.2.

Communication settings

4.4.4.2.1.

Configuration of SVR600

Startup SVR600 on the server PC and click the button Settings. Set
the communication mode (Comm. mode) to Serial cable, choose the
correct COM-port and accept the default values in the other fields:
Server port:
Inactivity timeout:
4-8
1KHW001489-EN
Internet,
Intranet,
LAN,
WAN
Communication via intranet/internet
5111
3'600 seconds
November 2005
Substation
SVR500
Ethernet
RS-232
connection
connection
User Interface Program
ETL600
ETL600

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents