ABB ETL600 Instruction Manual page 365

Revision:
A
3.6 Unsuccessful or incomplete firmware download to a module of type
P4LT/P4LU and the HMI600 informs you to execute a firmware download
1. On the File menu click New. This opens the Connect dialog box.
2. Click Logon, Equipment ID: 0
3. Click Read & Write access.
4. Click OK. This opens a HMI600 child window.
5. On the Equipment menu, click Commissioning and maintenance and then click Firmware
download...
6. In the following message box click Yes if you are aware of a malfunction of the PLC link. This
opens the Firmware download dialog box. Otherwise click No.
7. Uncheck the checkbox Automatic firmware download.
8. Verify that the Slot ID: is set to N45 [P4LT/P4LU].
9. Click Start firmware download to start the operation.
10. This opens a Select firmware file for module P4LT dialog box. Browse to the folder where
the firmware download files are stored – refer to 2.3. Select the file P4LT_***.ldr and click
Open.
11. Wait approx. 10 minutes until the message box Firmware download successful will appear
and click OK.
12. Click Reset system and wait until the Close button is accessible.
13. Click Close to leave the firmware download dialog box.
Language: Page:
EN 7/7
1KHW001496-EN