ABB ETL600 Instruction Manual page 359

Firmware Download for ETL600
Responsible Department: Prepared:
PTUKT 2005-09-19 M. Buhl
Valid for: Derived from:
- 1KHL016378-EN
Power Line Carrier Equipment: Series ETL600
Contents
1 Purpose of document
2 General
2.1 Necessity for a firmware download
2.2 Risks of a firmware download
2.3 Firmware download files
2.4 Firmware download parameters
2.4.1 Automatic firmware download
2.4.2 User controlled firmware download
3 Firmware download
3.1 Update of non-configured equipment
3.2 Update of already configured equipment
3.3 Modify equipment if the configuration download detects an incompatibility
3.4 Extend the equipment and the HMI600 informs you about firmware incompatibilities
3.5 Exchange a module and the HMI600 informs you about firmware incompatibilities
3.6 Unsuccessful or incomplete firmware download to a module of type P4LT/P4LU and the HMI600
informs you to execute a firmware download
List of equipment:
PC with Windows 2000 or XP
HMI600 software
Firmware download files
PC P4LT/P4LU cable (1:1 serial RS-232)
Note:
•
Please refer 1KHW001490 for compatibility between software HMI600, firmware and hardware of ETL600.
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to
third parties without express authority is strictly forbidden. © ABB Switzerland Ltd
ABB Switzerland Ltd
Approved:
2005-11-16 C. Leeb
Replaces:
-
Firmware Download for ETL600
1KHW001496-EN
Archive No.:
-
Distribution:
-
Classification-No.: File:
- 1KHW001496ae Firmware
Download for ETL600.doc
Rev. Date:
A 05-11-16
Lang.: Page:
EN 1/7
2
2
2
2
3
4
4
4
4
4
5
5
6
6
7