ABB ETL600 Instruction Manual page 325

APLC Channel Equalization ETL600 Rel.1
Responsible Department: Prepared:
PTUKT 2005-09-15 H.-J. Maag
Valid for: Derived from:
- 1KHL015943-EN
Power Line Carrier Equipment: Series ETL600
Contents
1 Purpose of document
2 Abbreviations and Definitions
3 Equalizer concept
3.1
3.2
3.3
3.4
4 Establishing a new equalizer
5 Equalizing a channel
6 Changing the length or mode of a running equalizer
7 Remote equalizer manipulation
8 Application specific equalizer choices
8.1
8.2
9 Recommended procedure to equalize a channel
10 Recommended procedure to change the equalizer settings
List of equipment:
PC with Windows 2000 or XP
HMI600 software
PC P4LT/P4LU cable
Note:
•
Please refer 1KHW001490 for compatibility between software HMI600, firmware and hardware of ETL600.
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to
third parties without express authority is strictly forbidden. © ABB Switzerland Ltd
ABB Switzerland Ltd
Approved:
2005-11-16 H. Benninger
Replaces:
-
APLC Channel Equalization ETL600 Rel.1
None (no equalizer)
Short equalizer
Medium equalizer
Long equalizer
Rules if external teleprotection in the selected channel is used
Equalizer for NSK600 modems with data rates of 2.4, 4.8 and 9.6 kbps
Distribution:
-
Classification-No.:
-
1:1 serial RS-232
1KHW001494-EN
Archive No.: Rev. Date:
- A 05-11-16
Lang.: Page:
EN 1/6
File:
1KHW001494ae APLC Channel
Equalization.doc
2
2
2
2
2
3
3
3
4
5
5
5
5
6
6
6