ABB ETL600 Instruction Manual page 304

Revision:
A
Applying the second method to the configuration given below, a sinus with –9.0 dBm is fed into
remote equipment. Calculating the expected output level at local equipment with the formula above
results to:
L = -9.0 dBm – (-4.00 dBr) + (-1.00 dBr)
out
The expected output level L
Equipment REMOTE
Equipment LOCAL
B.10.11 Teleoperation port AF1
If the port AF1 is not used for a telephony application and if the port is switched to 'On –
disconnectable' or 'On – non disconnectable', take the measurement as described in B.10.10.
B.10.12 Teleoperation port AF2
If the port is switched to 'On – disconnectable' or 'On – non disconnectable' take the
measurement as described in B.10.10.
B.10.13 Teleoperation port AF3
If the port is switched to 'On – disconnectable' or 'On – non disconnectable' take the
measurement as described in B.10.10.
B.10.14 Teleoperation port AF4
If the port is switched to 'On – disconnectable' or 'On – non disconnectable' take the
measurement as described in B.10.10.
B.10.15 Teleoperation AF4 used for ext. Teleprotection
After measurement of B.10.14 is done:
1. Recalculate expected output level of AF4-OUT by adding the NSD570 boost value,
available in the configuration view (View / Display Configuration / Effective boost
value ext. TPE1/2/3).
2. Activate the EXT-BOOST input at the remote equipment. If EXT-BOOST is configured as
'inverted', contacts at terminal, teleoperation, 9a-9b must be opened, otherwise closed.
3. Take the measurement at AF4-OUT of local equipment.
Language:
EN
is just as applying the first method –6.0 dBm.
out
TELEOPERATION
Port AFx:
Squelch:
Reference signal:
Reference signal level input:
Reference signal level output:
Weight of port:
Max. output level:
Relative input level:
Relative output level:
Input filter:
Output filter:
TELEOPERATION
Port AFx:
Squelch:
Reference signal:
Reference signal level input:
Reference signal level output:
Weight of port:
Max. output level:
Relative input level:
Relative output level:
Input filter:
Output filter:
Page:
1KHW001493-EN
18/37
Disconnectable at CH1
Disabled
600 Bd FSK
-9.00 dBm (RMS)
-9.00 dBm (RMS)
0.71
-7.00 dBm (PEP)
-4.0 dBr
-4.0 dBr
None
None
Disconnectable at CH1
Disabled
600 Bd FSK
-6.00 dBm (RMS)
-6.00 dBm (RMS)
0.71
-4.00 dBm (PEP)
-1.0 dBr
-1.0 dBr
None
None