ABB ETL600 Instruction Manual page 306

Revision:
A
B.13 Documentation
After the testing is complete, take a printout of the configuration and status data.
1. Click the green Upload arrow
starts configuration and status upload from the equipment. The status is displayed in the
window.
2. From the File menu, click Print to print the status data.
3. From the View menu, click Display configuration.
4. From the File menu, click Print to print the configuration data.
5. From the File menu, click Save As to save the active document to disk with the Serial
No. of the ETL600 coded in the file name, e.g. HE400327B0.ET6. All settings you have
made while working in the document will be saved to the new file, including the last
measured AF and frequency response.
B.14 Manual reset
Reset ETL600 with HMI600 (Equipment / Reset) or by switching off and on the power and wait
until all alarms disappear.
Language: Page:
EN 20/37
in the HMI600 toolbar with the left mouse button. This
1KHW001493-EN