Parameter Window A: Output (Valve Drive, Thermoelectric (Pwm)) - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.2

Parameter window A: Output (Valve drive, thermoelectric (PWM))

All settings for the output A/B as valve drive, thermoelectric (PWM) are made in this parameter window.
Note
This parameter window is visible for the products FCA/S 1.1.1.2 and FCA/S 1.1.2.2.
These parameters appear if the option Valve drive, thermoelectric (PWM) has been selected for the
output.
For further information see:
Type of valve drive, de-energized
Options:
This parameter determines the function of the valve drive.
Note
De-energized closed valve drives (N.C.)
If no current flows in the valve drive, the valve is closed. If current flows in the valve drive, the valve
opens.
De-energized opened valve drives (N.O.)
If no current flows in the valve drive, the valve opens. If current flows in the valve drive, the valve then
closes.
Pulse width modulation
Closed
Open
(PWM), p. 249.
FCA/S 1.x.x.1 | 2CDC508134D0202 97