ABB i-bus KNX Product Manual page 98

®
ABB i-bus KNX
Commissioning
Parameter window Enable output A...D – Fan Coil Actuator, 0...10 V
Output A
Options:
This parameter defines the individual operation mode of the output.

Disabled: No operation mode selected.

Valve drive, analog (0...10 V): The parameter (window) and communication objects for the operation
mode Valve drive, analog (0...10 V) are enabled.
This also applies for output C.
Assignment of the valves
Note
Outputs A and C are automatically assigned via the selection in the parameter Fan Coil operating mode.
96 2CDC508134D0202 | FCA/S 1.x.x.1
Disabled
Valve drive, analog (0...10 V)
Valve control output A
0...10 V
Valve voltage on bus voltage failure
0 volts