®
ABB i-bus
KNX
Commissioning
3.2.3.18
Parameter window Automatic control (One-level)
This parameter window is visible if the option Yes has been selected under the parameter Enable
automatic operation in
This is the parameter window where you define the threshold values for switchover of the fan speed. You
can also enable limitations here.
Object value "Automatic On/Off"
switch on to the automatic
Options:
This parameter defines how the device should react to a telegram.
1: Automatic is activated by a telegram with value 1.
0: Automatic is activated by a telegram with value 0.
156 2CDC508134D0202 | FCA/S 1.x.x.1
Parameter window E, F, G: Fan
1
0
(One-level), p. 149.