Parameter Window A: Output (Valve Drive, Analog (0 - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.4 Parameter window A: Output (valve drive, analog (0...10 V))
All settings for Valve drive analog (0...10 V) are made in this window.
Note
This parameter window is visible for the products FCA/S 1.2.1.2 and FCA/S 1.2.2.2.
Control voltage with closed valve
Options:
This parameter determines the function of the valve drive.
Note
De-energized closed valve drives (N.C.)
If no current flows in the valve drive, the valve is closed. If current flows in the valve drive, the valve
opens.
De-energized opened valve drives (N.O.)
If no current flows in the valve drive, the valve opens. If current flows in the valve drive, the valve then
closes.
0 volts
10 volts
FCA/S 1.x.x.1 | 2CDC508134D0202 109