ABB i-bus KNX Product Manual page 161

®
ABB i-bus KNX
Commissioning
Reset time for automatic operation
in s [1...65,535], 0 = inactive
Options:
This parameter determines after which time the automatic operation is reset.

0: If 0 is selected, automatic operation is not reset.

1...65,535: If a time from a value of 1 is set, automatic operation is reset after the given time.
Note
A change of the parameter value will only become active after the next deactivation of automatic
operation by a direct communication object.
0
1...65,535
FCA/S 1.x.x.1 | 2CDC508134D0202 159