Parameter Window Manual Operation - Settings - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
Parameter window Manual operation – Settings
3.2.2
Note
This parameter window is only visible for devices with manual operation.
Settings for manual operation:
Manual operation
Options:
This parameter defines if the switchover between the operating states Manual operation and KNX
operation is possible via the button
For further information see:
Note
The manual operation overwrites the input states.
72 2CDC508134D0202 | FCA/S 1.x.x.1
Disabled
Enabled
Enable/disable via comm. object
on the device or via a communication object.
Manual operation, p. 61