Parameter Distinction Between Long And Short Operation - No - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
Parameter Distinction between long and short operation – No
3.2.4.2.1
If the option No has been selected with the parameter Distinction between long and short operation, the
following parameters appear in
Opening the contact -> Event 0
Closing the contact -> Event 1
<−−− NOTE
Parameter window a: Switch
Activate minimum signal duration
Options: No
Yes
Selection Yes:
Dependent parameters:
On closing the contact
in [0...65,535] X 0.1 s
0...10...65,535
Options:
On opening the contact
in [0...65,535] x 0.1 s
0...10...65,535
Options:
sensor, p. 171:
FCA/S 1.x.x.1 | 2CDC508134D0202 173