®
ABB i-bus
KNX
Commissioning
3.2.4.4
Parameter window a: PT100, PT1000 and KTY
3.2.4.4.1
Parameter window a: PT100/PT1000
This operating mode allows the sending of temperature values.
This parameter window is visible if one of the options PT100 or PT1000 has been selected in the
parameter Input a in
The Sensor output is set with these parameters. The data can be found in the sensor manufacturer's
technical documentation.
Send output value as
This parameter is fixed to 2-byte [EIB floating point].
Parameter window Enable inputs
What is the output value?
The Analogue Input records a sensor measured value, converts it according to the set parameters
and sends it on the bus. This sent value is designated as the output value.
a...c, p. 170.
FCA/S 1.x.x.1 | 2CDC508134D0202 191