Parameter Window Function - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.5

Parameter window Function

In this parameter window, various functions for each output can be activated. The functions are identical
for the operation modes Valve drive, thermoelectric (PWM), Valve drive, motor-driven (3-point) and Valve
drive, analog (0...10 V).
Enable function "Priority and safety
operation"
Options:

Yes: The
Enable communication object
"Status Control value" 1-bit/byte
Options:
This parameter enables the communication object Status Control value. The control status of the output is
sent via this communication object.

Yes: The communication object
No
Yes
Parameter window
No
Yes
Dependent parameters:
Security, p. 117, is enabled.
Status Control value, p. 212, is enabled.
FCA/S 1.x.x.1 | 2CDC508134D0202 113