GE LOGIQ E9 Service Manual page 543

D 5180483-100, R
IRECTION
Table 7-97
5.
6.
7 - 340
PROPRIETARY TO GE
. 7
EV
Freeing the Z-Axis
Steps
Pull back on the pry bar, and push up on
the underside of the Lower Operator
Panel until the Z-Axis Gear pops out of
the stuck position. The Top Console will
only rise slightly when the Drive Gear
becomes free.
NOTE: Apply only enough force to free
the jammed gear, but some force is
required to free the Z-Axis Gear.
Use the Z-Mechanism manual release
handle to raise the Top Console to ensure
the jammed Z-Axis Gear is free.
Perform the Functional Checks as described in the Drive Gear Assembly replacement section.
See:
Table 8-203 "Drive Gear Assembly replacement Functional Checks" on page
Section 7-9 - Troubleshooting Tips
LOGIQ E9 P
ROPRIETARY
Corresponding Graphic
S M
ERVICE ANUAL
8-332.