Log Analysis - R4.X - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-9-17

Log Analysis - R4.x

NOTE: The examples used in this section are from a GFI Configuration system.
Here is an example of how to analyze a Log:
1.) Startup Logging
; Starting log system
Same familiar comment to denote startup of the system.
;
ScDisplayType(364); Monitor found in registry: MFG: "ENC", Model: "GA700", Serial Number: "20037077"
; EchoLoader(364); Primary display resolution set to High by SmartVideoResolution (display = GA700)
; Preset reset(364); SaveToStream change[0] hospital [GE Healthcare]
; Warning; ScResCat(364); Couldn't find filename to save to.
; Info ; EchoLoader(364); Primary display resolution set to 1280 x 1024 (60 Hz refresh - fallback from 75)
;
GFI 0x02280108 , GFI_P2P_filter 0x00021006 driver versions are opened
; Downloading LSW from file: gfireboot.out
Driver for communication with GFI started.
; Downloading LSW from file: gfi2tr.out
; Downloading FPGA contents from file: C:\Scanner\target/firmware/GFI/gfi2_fpga_1.bin
GFI FPGA and DSP firmware downloaded
;
ScFEProxy(364); FEProxy::targetPresent() is true.
The card rack HW has been detected and system is being booted normally.
;
ConfigLog(364); TARGET_ROOT: "C:\Scanner\target"
; ConfigLog(364); TEST_ROOT: "D:\Scanner\target"
; ConfigLog(364); TEMP:
; ConfigLog(364); Overall SW version R1.0.3C
; ConfigLog(364); Overall SW Part Number 5193239-4
; ConfigLog(364); SW Build Version XP-Shadow_mke_LOGIQ E9_p1
; ConfigLog(364); SW Build Date Mon Jul 07 17:01:45 2008
; ConfigLog(364); Ghost Part Number 5135125-20 Rev 3
; ConfigLog(364); Ghost Date 2008-06-27 14:00
; ConfigLog(364); BEP Version in Ghost = 5
Report of the SW and Base load version.
; ConfigLog(364); Processor Identifier = x86 Family 6 Model 15 Stepping 2, GenuineIntel
; ConfigLog(364); Number of Processor = 2
; AcqLoader(364); Cannot find file none.dll
; ScFEProxy(364); SSN: E00009
7 - 244
PROPRIETARY TO GE
. 7
EV
"D:\temp"
Section 7-9 - Troubleshooting Tips
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL