Shortcut Keys - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-9-1

Shortcut Keys

There are several Shortcut keys to be utilized on the LOGIQ E9:
• Alt + 1 or Alt + 2 to mark events in the log file. Used for the flagging issues during operation.
• Alt + F10 = is the SW Shut Down.
If the system can be shut-down by using these keys it means that SW is working and the problem
could be the ON/OFF switch or the wire that carries the shut-down signal.
Alt + F5 or F11 for the echo simulator (keyboard simulation), brings up or removes the frontpanel
•
simulator. It may be used with VCO to press buttons on the frontpanel that are not a standard key
on your PC.
• Alt
• Alt + D to capture the scanner logs (See:
"7-3-4 Collecting a Screen Capture with Logs (cont'd)" on page 7-6
• Alt + N activates the Network Sniffer monitor, or restores it if it is minimized or hidden.
R4.x and later
With the Service Key connected:
Alt - ctrl - D -> brings up the Debug command window. This can be used to run Sclogs. See:
•
"7-3-4 Collecting a Screen Capture with Logs (cont'd)" on page 7-6
• Alt - Tab -> allows you to switch between task screens. You must access Windows first, then re-
launch the application to be able to use this combination of screens.
7 - 194
PROPRIETARY TO GE
. 7
EV
+ A = to bring up a cursor (Alt + A stands for "Arrow").
Section 7-9 - Troubleshooting Tips
LOGIQ E9 P
ROPRIETARY
.
.
S M
ERVICE ANUAL