GE LOGIQ E9 Service Manual page 468

D 5180483-100, R
IRECTION
7-9-18-5 Errors versus Logs (cont'd)
Bad Hardware
• From logfile.txt:
Error
SubType 62:
temperature[37] RX2_TOP. Severity : FatalHW
• System tried to read the temperature but got no or invalid response
• Can be temperature or voltages
• Voltage reading errors are usually NOT hardware failures, but single failures of the system to read
a voltage. Replace hardware only when repeated errors are seen.
• Log\logfile.txt Example:
Error ; acqHWCAP(228); ********************************************
Error ; acqHWCAP(228); ***
Error ; acqHWCap(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ********************************************
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ***
Error ; acqHWCAP(228); ********************************************
Info ; DFEManager(228); HandleRunFlag: setting RunDfe and RunBlock flags to true!
Error ; EAErrorHandler(228); Error from acqHWCAP: Invalid Hardware Rack Configuration - Check logs. Severity :
FatalHW
Info ; DFEManager(228); HandleRunFlag: setting RunBlock flag to false!
Warning; EAErrorHandler(228); Stops scan
ONLY SHOWS WHAT WAS FOUND, NOT WHAT WAS BAD!
PROPRIETARY TO GE
. 7
EV
; EAErrorHandler(2168); Error from HouseKeeping: GFI Hardware Exception:
Monitoring : RFIMonitor::handleMonitoring() - Failed reading
HW RACK CONFIGURATION INVALID!!!
Board FuncRevs Provided
-----------------------
BP_FuncRev2A (qty=1)
DRX_FuncRev3E (qty=3)
GFI_FuncRev2A (qty=1)
GRLY_FuncRev2C (qty=1)
GRX_FuncRev2A (qty=1)
GRX_FuncRev2B (qty=1)
GTX_FuncRev2C (qty=3)
Chapter 7 Diagnostics/Troubleshooting
LOGIQ E9 P
ROPRIETARY
***
***
***
***
***
***
***
S M
ERVICE ANUAL
7 - 265