Checking The Ct Input Module Status On Gx Works2 System Monitor - Mitsubishi Electric MELSEC-Q series User Manual

11.4
Checking the CT Input Module Status on GX Works2
System Monitor
To check the LED status or the setting status of the intelligent function module switch setting, select the H/W
information of the CT input module on the system monitor of GX Works2.
(1) Hardware LED information
The LED status is displayed.
No.
1)
2)
3)
(2) Hardware switch information
The setting status of the intelligent function module switch setting is displayed.
For details on the setting status, refer to the following.
• Switch Setting (
1)
2)
232
LED name
0000
RUN LED
0001
ERR. LED
Alternating indication of 0000
(When the CT input module in communication, the LED status is displayed on GX
ALM LED
Works2. The values 0000
Page 143, Section 8.2)
Item



MODE

: Indicates that the LED is off.
H
: Indicates that the LED is on.
H
and 0001
H
and 0001
H
Intelligent function module switch
3)
Status
: Indicates that the LED is flashing.
H
are not always displayed evenly.)
H
Switch1
Switch2
Switch3
Switch4
Switch5