Mitsubishi Electric MELSEC-Q series User Manual page 124

(28)CH Peak current detection count reset request (Un\G302 to Un\G309)
To set the number of peak current detection to 0, set Reset requested (1) for each channel.
For details on the peak current detection function, refer to the following.
• Peak Current Detection Function (
Peak current detection count reset request
(a) Default value
All channels are set to Reset not requested (0).
(29)CH Peak current detection count reset complete (Un\G310 to Un\G317)
The number of peak current detection can be checked for completion for each channel.
For details on the peak current detection function, refer to the following.
• Peak Current Detection Function (
When Reset requested (1) is set to CH Peak current detection count reset request (Un\G302 to Un\G309) and
Peak current detection count (Un\G334 to Un\G341) is reset, Reset request completed (1) is stored in Peak
current detection count reset complete (Un\G310 to Un\G317).
When Reset not requested (0) is set to CH Peak current detection count reset request (Un\G302 to Un\G309),
Reset not requested (0) is stored in CH Peak current detection count reset complete (Un\G310 to Un\G317).
122
Reset not requested
Reset requested
Page 44, Section 4.7)
Page 44, Section 4.7)
Setting value
0
1